In-System USB 2.0 Programmer for PSoC microcontrollers

PSoCprog2 is the IN-SYSTEM programmer for the Cypress series of PSoC microcontrollers (programs all of PSoC microcontrollers). The application software will run on various operating systems including Windows 95, 98, ME, NT, 2000, and XP. The software is simple and intuitive to use.

Our latest PSoCprog2 Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP).

When connected to a device or a development system, it becomes IN-SYSTEM programmer.

When plugged in ZIF socket, it becomes a standard programmer. You can order optional ZIF socket, used only for high volume production.

One of the possibilities for connecting PSoCprog2 to a microcontroller is via an IDC10 connector. Look at the picture on the right side. All you have to do is to put one 2x5 connector between microcontroller and other parts of the board. Inserting PSoCprog2 connector you will be able to program PSoC In System.

With complementary software, PSoCprog2 programmer represents a great tool for all those working with Cypress’s
microcontrollers. The microcontroller connects to the PSoCprog2 programmer via 6 lines, three of which are VCC,
MCU-VCC and GND and others are PGC, PGD and RST. Unlike programmers whose operation is based on bootloads
(and which need to give away part of their memory to a bootload program) PSoCprog2 programs the microcontroller
externally so that the entire memory is available for the programmer.

Keyboard Shortcuts

New version of software includes a number of shortcuts which facilitate programming:
  • Alt-E Erase
  • Alt-W Write
  • Alt-V Verify
  • Alt-R Read
  • Alt-D Change MCU
  • Ctrl-S Save
  • Ctrl-O Open (Load)
  • Ctrl-R Reload
Command Line

Alternatively, you can use the PICFlash2 programmer from the command line. Here are the command line parameters:

  • -w Write to PSoC
  • -v Verify
  • -r Read from PSoC
  • -e Erase PSoC
  • -p PSoC name (for example CY8C27643, CY8C26443...)
  • -f Filename (use " as delimiters)
Examples:

psocprog2.exe -w -pCY8C27643 -v -f"C:\somefile.hex"
This will program the PSoC using C:\somefile.hex and it will verify the write.
psocprog2.exe -r -pCY8C27643
This will read the PSoC contents into on screen buffer.
psocprog2.exe -e -pCY8C27643
This will erase the PSoC.

 PSoCprog2 software for Windows [488KB]  Drivers for PSoCprog2 software [25KB]
 PSoCprog2 Manual [208KB]  PSoCprog2 schematic [Available Soon]  Installing USB drivers [452KB]

Drawings for all dev.system parts are simple and clear.

  Package contains:


 

PSoCprog2 USB 2.0 programmer.

USB cable.

Printed Board Schematic.

CD with software and drivers.

The Box is very resistant to shock and transport damage

PSoCprog2 comes with CD containing software and schematic.

All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.

$119.00 USD PSoCprog2 USB 2.0 In Circuit Programmer

If you have any problems with CC processing please inform us: gparrodi@melektronikos.com

If you want to pay directly to our bank account please contact us: gparrodi@melektronikos.com