System supports 64, 80 and 100 pin PIC18FxxJxx microcontrollers (it comes with PIC18F87J60 - PIC18 Microcontroller with an integrated 10Mbps Ethernet communications peripheral, 80 Pin Package).LV 18FJ also supports Character LCD as well as Graphic LCD.
LV 18FJ is easy to use Microchip PIC18FxxJxx development system. LV 18FJ has many features that makes development easy.
NOTE: LCD, GLCD, DS1820 and MMC/SD Cards are not included in the price !!!
Double RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked dip switches.
MMC/SD card connector for data logging application.
System supports 64, 80 and 100 pin PIC18FxxJxx MCU's.
4 potentiometers are available for testing AD conversion and comparators.
Power Supply select Switch - Choose USB or external power supply.
RJ45 Connector - For testing ethernet applications.
All pins are connected to IDC connectors for further connecting.
70 diodes for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
70 buttons for program developing needs.
USB connector - For connecting on-board programmer with PC.
Very fast USB 2.0 programmer with mikroICD support on board.
Graphic LCD display plugs in via a connector on-board.
Graphic LCD potentiometer - For GLCD contrast adjusting.
LCD display plugs in via a connector on-board.
External power supply can be DC or AC.
Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.
LCD potentiometer - For LCD contrast adjusting.
All pins are marked on the back of the board.
Choose voltage level to be applied when a button is pressed (GND or +3.3V).
Soft rubber foot give good connection with the working table.
GLCD - Graphic display 128x64.
Reset circuit
MMC Slot - MMC card is used as storage media for a portable device, in a form that can easily be removed for access by a PC.
PIC18 Microcontrollers with an integrated 10Mbps Ethernet communications peripheral. This single-chip solution is ideal for applications requiring remote control and monitoring.
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
LV 18FJ development system is a full-featured development board for the Microchip PIC18FxxJxx microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC18FxxJxx microcontrollers. It allows the PIC microcontroller to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software.
Figure on the right illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to microcontroller, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.
3 in 1 Development Tool - Development Board + USB 2.0 on-board LV 18FJ-Programmer + mikro ICD on-board: mikro ICD is a highly effective tool for Real-Time debugging on a hardware level. The ICD debugger enables you to execute a mikroC/mikroPascal/mikroBasic program on a host PIC18FxxJxx microcontroller and view variable values, Special Function Registers (SFR), memory and EEPROM as the program is running.
LV 18FJ-Programmer: The microcontroller is connected to the LV 18FJ programmer via 5 lines, two of which are +3.3V and GND. Unlike programmers whose operation is based on bootloads, LV 18FJ programs the microcontroller externally so that the entire memory is available for the program. ICSP mode is a special programming protocol that allows you to read and write to PIC18FxxJxx device family memory. The ICSP interface is a 2-wire serial protocol implemented using the PGC and PGD pins. The PGC pin is used as a clock input pin and the clock source must be provided by the programmer. The PGD pin is used for sending command data to and receiving response data from the programming executive.
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and the many practical examples that we have provided allow a quick start in programming PIC [more]
Comprehensive, stand-alone Pascal compiler for PIC MCUs. Develop your applications in an intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty of practical examples and a comprehensive documentation. [more]
AD conversion and displaying on LCD.
AD conversion and displaying on LED
diodes in binary form.
AD conversion and send conversion result via USART.
Timer 0 and time measuring.
Examples for SPI communication.
Examples for CAN communication.
Examples for Sound generation.
Sending and receiving data over Ethernet.
Examples for SPI Port Expander.
Interrupt upon port B state change.
Detection of button pressed on portB.
Printing text on LCD.
Diodes blinking on port B.
Display text and images on Graphic LCD.
Examples for I2C communication.
Examples for RS485 communication.
Examples for sending and receiving data using Manchester Code.
Examples for Sinusoid generation.
Examples for SPI Graphic LCD.
Measuring temperature with DS1820
and sending data to the PC via serial
communication.
Sending data to the PC via serial
communication.
Creating delay with timer 0.
Creating delay with timer 1.
Creating delay with timer 2.
Examples for Toshiba T6963 Graphic LCD.
Read date and time from PCF8583 RTC Real Time Clock.
Examples for reading and writing data to MMC or CF cards.
Drawings for all dev.system parts are simple and clear.
LV 18FJ development system.
USB cable.
Serial cable.
Printed LV 18FJ board schematic.
CD with software, drivers, board schematic and examples in BASIC, Pascal and C.
The Box is very resistant to shock and transport damage.
LV 18FJ comes with printed board schematic.
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
$189.00 USD
LV 18FJ Development System Available Soon !!!
$38.00 USD
Additional MCU card with PIC18F87J60-PT Available
Soon !!!
$19.00 USD
2x16 LCD and DS1820 temperature sensor
$24.00 USD
Graphic LCD 128x64 dots
If you have any problems with CC processing please inform us: gparrodi@melektronikos.com
If you want to pay directly to our bank account please contact us: gparrodi@melektronikos.com