OUT OF STOCK !!! New version available here.
System supports 8, 20, 28 and 40 pin microcontrollers (it comes with ATMEGA16). Each jumper, element and pin is clearly marked on the board. It is possible to test most of the industrial needs on the system: temperature controllers, counters, timers etc.
EasyAVR4 is easy to use Atmel AVR development system. EasyAVR4 has many features that makes
your development easy. You can choose between USB or External Power supply. EasyAVR4
also supports Character LCD as well as Graphic LCD.
NOTE: LCD, GLCD, DS1820 and MMC/SD memory cards are not included in the price !!!
RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked DIP switches.
Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.
Support for Microcontrollers in DIP8, DIP14, DIP18, DIP28 and DIP40 socket.
Vref+ - Voltage reference 4.096V is available.
Power Supply select - USB or external.
4 seven-segment digits in multiplex mode.
All pins are connected to IDC connectors for further expansion.
32 diodes for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
32 buttons for program developing needs.
DIP switch for separating port A pins when they are used as A-D inputs.
Very fast USB 2.0 programmer on board.
LCD display plugs in via a connector on PC board.
Selectable contrast :GLCD or for LCD.
On the same connector user can connect GLCD or LCD in 8-bit mode.
External power supply can be DC or AC.
Crystal can be removed and replaced by another one.
LCD 2x16 in 8-bit mode.
All pins are marked on the back of the board.
Choose voltage level to be applied when a button is pressed (GND or +5V).
MMC\SD card slot - For MMC\SD memory cards
Reset circuit.
JTAG connector available on board for easier prototype developing.
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
When using a character LCD in 8-bit mode, the connector that is shared with the GLCD is used. The character LCD communicates with the MCU via an 8-bit data bus. The most commonly used LCD is 2x16 LCD.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
EasyAVR4 development system is a full-featured development board for the Atmel AVR microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the AVR microcontrollers. It allows the AVR microcontroller to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software. Figure on the left illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to microcontroller, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.
USB 2.0 on-board programmer - AVRprog2: You will get the USB programmer which doesn't use boot loader or any similar way of programming. The whole AVR memory and all pins are available to you. Aside from that, you will have state-of-the-art fast USB AVR InSystem programmer for your future projects.
Our latest AVRprog2 Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP).
AVRprog2 software for Windows [0.9MB]
Drivers for AVRProg2 software [1.1MB]
Examples for EasyAVR4 [134KB]
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming AVR. [more]
Comprehensive, stand-alone Pascal compiler for AVR MCUs. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
AD conversion and displaying on LCD.
AD conversion and displaying on LED
diodes in binary form.
AD conversion and send conversion result via USART.
Timer 0 and time measuring.
Measuring temperature with DS1820
and displaying on LCD.
Examples for SPI communication.
Examples for CAN communication.
Examples for Sound generation.
Sending and receiving data over SPI Ethernet.
Interrupt upon port B state change.
Detection of button pressed on portB.
Printing text on LCD.
Diodes blinking on port B.
Display text and images on Graphic LCD.
Examples for I2C communication.
Examples for RS485 communication.
Examples for sending and receiving data using Manchester Code.
Examples for Sinusoid generation.
Examples for Toshiba T6963 Graphic LCD.
Sending data to the PC via serial
communication.
Creating delay with timer 0.
Creating delay with timer 1.
Creating delay with timer 2.
Sending data from PS/2 keyboard.
One-wire communication with temperature sensor.
Read date and time from PCF8583 RTC Real Time Clock.
Examples for reading and writing data to MMC or CF cards.
Examples for using 7SEG digit display.
Drawings for all dev.system parts are simple and clear.
EasyAVR4 development system.
USB cable.
Serial cable.
Board schematic.
CD with software, drivers and examples in BASIC and Pascal.
The Box is very resistant to shock and transport damage.
NOTE: GLCD, 2x16 LCD, DS1820 and MMC/SD memory cards are not included in the price !!!
EasyAVR4 comes with printed board schematic.
Real-Time clock (RTC) is a electronic clock that keeps track of the current time even when the MCU is turned off. [more]
CAN 2 Board with SPI interface for all MCU which have SPI communication. [more]
The IrDA defines physical specs. protocol standards for the short range exchange of data over infrared light. [more]
CompactFlash (CF) is a data storage device, used in portable electronic devices. [more]
The RS485 standard allows the user to configure inexpensive local networks using twisted pair wire. [more]
Connect Accel. board to the development system, load an example and it's all set to start the measuring. [more]
Ethernet is a large and diverse family of frame-based computer networking technologies for LAN's.[more]
Port Expander Board - Easy way to use expand ports in your design and prototype development. [more]
EasyConnect - Connect your peripherals easy and fast using high quality connectors. [more]
EasyInput - Make input levels easy and fast using high quality DIP switch.[more]
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
$16.20 USD
2x16 LCD and DS1820 temperature sensor
$24.00 USD
Graphic LCD 128x64 dots
$10.90 USD
AT90PWM1 and AT90PWM2 to DIP40B Adapter Board
$10.90 USD
AT90PWM3 to DIP40B Adapter Board
If you have any problems with CC processing please inform us: gparrodi@melektronikos.com
If you want to pay directly to our bank account please contact us: gparrodi@melektronikos.com